Characterizing physical habitat preferences and thermal refuge occupancy of brook trout (Salvelinus fontinalis) and Atlantic salmon (Salmo salar) at high river temperatures

Anthropogenic influences, including climate change, are increasing river temperatures in northern and temperate regions and threatening the thermal habitats of native salmonids. When river temperatures exceed the tolerance levels of brook trout and Atlantic salmon, individuals exhibit behavioural thermoregulation by seeking out cold‐water refugia – often created by tributaries and groundwater discharge. Thermal infrared (TIR) imagery was used to map cold‐water anomalies along a 53 km reach of the Cains River, New Brunswick. Trout and salmon parr did not use all identified thermal anomalies as refugia during higher river temperature periods (>21°C). Most small‐bodied trout (8–30 cm) were observed in 80% of the thermal anomalies sampled. Large‐bodied trout (>35 cm) required a more specific set of physical habitat conditions for suitable refugia, that is, 100% of observed large trout used 30% of the anomalies sampled and required water depths >65 cm within or adjacent to the anomaly. Densities of trout were significantly higher within anomalies compared with areas of ambient river temperature. Salmon parr were less aligned with thermal anomalies at the observed temperatures, that is, 59% were found in 65% of the sampled anomalies; and densities were not significantly different within/ outside anomalies. Salmon parr appeared to aggregate at 27°C, and after several events over 27°C variability in aggregation behaviour was observed – some fish aggregated at 25°C, others did not. We stipulate this is due to variances of thermal fatigue. Habitat suitability curves were developed for velocity, temperature, depth, substrate, and deep water availability to characterize conditions preferred by fish during high‐temperature events. These findings are useful for managers as our climate warms, and can potentially be used as a tool to help conserve and enhance thermal refugia for brook trout and Atlantic salmon in similar systems.     

Recovery of Collided RFID Tags With Frequency Drift on Physical Layer

In a passive ultra-high frequency (UHF) radio frequency identification (RFID) system, the recovery of collided tag signals on a physical layer can enhance identification efficiency. However, frequency drift is very common in UHF RFID systems, and will have an influence on the recovery on the physical layer. To address the problem of recovery with the frequency drift, this paper adopts a radial basis function (RBF) network to separate the collision signals, and decode the signals via FM0 to recovery collided RFID tags. Numerical results show that the method in this paper has better performance of symbol error rate (SER) and separation efficiency compared to conventional methods when frequency drift occurs.      

An extended stochastic pseudo-spectral Galerkin finite element method (XS-PS-GFEM) for elliptic equations with hybrid uncertainties

Nouy and Clement introduced the stochastic extended finite element method to solve linear elasticity problem defined on random domain. The material properties and boundary conditions were assumed to be deterministic. In this work, we extend this framework to account for multiple independent input uncertainties, namely, material, geometry, and external force uncertainties. The stochastic field is represented using the polynomial chaos expansion. The challenge in numerical integration over multidimensional probabilistic space is addressed using the pseudo-spectral Galerkin method. Thereafter, a sensitivity analysis based on Sobol indices using the derived stochastic extended Finite Element Method solution is presented. The efficiency and accuracy of the proposed novel framework against conventional Monte Carlo methods is elucidated in detail for a few one and two dimensional problems.     

Viability of intertwined supply networks: extending the supply chain resilience angles towards survivability. A position paper motivated by COVID-19 outbreak

An intertwined supply network (ISN) is an entirety of interconnected supply chains (SC) which, in their integrity secure the provision of society and markets with goods and services. The ISNs are open systems with structural dynamics since the firms may exhibit multiple behaviours by changing the buyer-supplier roles in interconnected or even competing SCs. From the positions of resilience, the ISNs as a whole provide services to society (e.g. food service, mobility service or communication service) which are required to ensure a long-term survival. The analysis of survivability at the level of ISN requires a consideration at a large scale as resilience of individual SCs. The recent example of coronavirus COVID-19 outbreak clearly shows the necessity of this new perspective. Our study introduces a new angle in SC resilience research when a resistance to extraordinary disruptions needs to be considered at the scale of viability. We elaborate on the integrity of the ISN and viability. The contribution of our position study lies in a conceptualisation of a novel decision-making environment of ISN viability. We illustrate the viability formation through a dynamic game-theoretic modelling of a biological system that resembles the ISN. We discuss some future research areas.     

电子束诱导沉积钴微米线及其铁磁性

通过电子束诱导沉积的方法制备了钴(Co)微米线,并利用扫描电子显微镜(SEM)、原子力/磁力显微镜(AFM/MFM)以及物性测量系统(PPMS)等手段对Co微米线的沉积尺寸、微结构、铁磁性和电学性质进行了测试和分析。研究结果表明:Co微米线轮廓清晰、均匀性好。在不同的沉积条件下,微米线的实际长度与设定长度基本一致;实际宽度数据呈类梯形分布,半高宽是设定值的2~10倍;实际厚度低于设定厚度的60%。沉积电流对Co微米线的铁磁特性有重要影响。当沉积电流大于0.5 nA时,样品呈现出良好的铁磁特性。另外,电学性能测试结果显示Co微米线呈现绝缘特性。成功制备了室温铁磁绝缘Co微米线,这将有助于深入开展微纳尺度的结构与器件的研究和应用。     

融合语义标签和噪声先验的图像生成

针对现有生成模型难以直接从复杂语义标签生成高分辨率图像的问题,提出了融合语义标签和噪声先验的生成对抗网络(SLNP-GAN)。首先,直接输入语义标签(包含形状、位置和类别等信息),使用全局生成器对其进行编码,并结合噪声先验来学习粗粒度的全局属性,初步合成低分辨率图像;然后,基于注意力机制,使用局部细化生成器来查询低分辨率图像子区域对应的高分辨率子标签,获取细粒度信息,从而生成纹理清晰的复杂图像;最后,采用改进的引入动量的Adam算法(AMM)算法来优化对抗训练。实验结果表明,与现有方法text2img相比,所提方法的像素精确度(PA)在COCO_Stuff和ADE20K数据集上分别提高了23.73%和11.09%;相较于Adam算法,AMM算法收敛速度提升了约一倍,且损失值波幅较小。可见,SLNP-GAN能高效地获取全局特征和局部纹理,生成细粒度、高质量的图像。     

Precise Orbit Determination for the FY-3C Satellite Using Onboard BDS and GPS Observations from 2013, 2015, and 2017

Using the FengYun-3C (FY-3C) onboard BeiDou Navigation Satellite System (BDS) and Global Positioning System (GPS) data from 2013 to 2017, this study investigates the performance and contribution of BDS to precise orbit determination (POD) for a low-Earth orbit (LEO). The overlap comparison result indicates that code bias correction of BDS can improve the POD accuracy by 12.4%. The multi-year averaged one-dimensional (1D) root mean square (RMS) of the overlapping orbit differences (OODs) for the GPS-only solution is 2.0, 1.7, and 1.5 cm, respectively, during the 2013, 2015, and 2017 periods. The 1D RMS for the BDS-only solution is 150.9, 115.0, and 47.4 cm, respectively, during the 2013, 2015, and 2017 periods, which is much worse than the GPS-only solution due to the regional system of BDS and the few BDS channels of the FY-3C receiver. For the BDS and GPS combined solution (also known as the GC combined solution), the averaged 1D RMS is 2.5, 2.3, and 1.6 cm, respectively, in 2013, 2015, and 2017, while the GC combined POD presents a significant accuracy improvement after the exclusion of geostationary Earth orbit (GEO) satellites. The main reason for the improvement seen after this exclusion is the unfavorable satellite tracking geometry and poor orbit accuracy of GEO satellites. The accuracy of BDS-only and GC combined solutions have gradually improved from 2013 to 2017, thanks to improvements in the accuracy of International GNSS Service (IGS) orbit and clock products in recent years, especially the availability of a high-frequency satellite clock product (30 s sampling interval) since 2015. Moreover, the GC POD (without GEO) was able to achieve slightly better accuracy than the GPS-only POD in 2017, indicating that the fusion of BDS and GPS observations can improve the accuracy of LEO POD. GC combined POD can significantly improve the reliability of LEO POD, simply due to system redundancy. An increased contribution of BDS to LEO POD can be expected with the launch of more BDS satellites and with further improvements in the accuracy of BDS satellite products in the near future.     

Estimation of power density in IMPATT using different materials

ABSTRACT

The RF output power dissipated per unit area is calculated using Runge-Kutta method for the high-moderate-moderate-high (n⁺-n-p-p⁺) doping profile of double drift region (DDR)-based impact avalanche transit time (IMPATT) diode by taking different substrate at Ka band. Those substrates are silicon, gallium arsenide, germanium, wurtzite gallium nitride, indium phosphide and 4H-silicon carbide. A comparative study regarding power dissipation ability by the IMPATT using different material is being presented thereby modelling the DDR IMPATT diode in a one-dimensional structure. The IMPATT based on 4H-SiC element has highest power density in the order of 10¹⁰ Wm^?2 and the Si-based counterpart has lowest power density of order 10⁶ Wm^?2 throughout the Ka band. So, 4H-SiC-based IMPATT should be preferable over others for the power density preference based application. This result will be helpful to estimate the power density of the IMPATT for any doping profile and to select the proper element for the optimum design of the IMPATT as far as power density is concerned in the Ka band. Also, we have focused on variation of power density with different junction temperatures and modelled the heat sink with analysis of thermal resistances.     

电感耦合等离子质谱法测定豆制品中铝含量的不确定度评定及方法改进

本文采用微波消解-电感耦合等离子体质谱法（ICP-MS）测定豆制品中铝的含量，对测定过程中可能引入的不确定度进行分析和评定。根据CNAS-CL01-G003:2019对测定不确定度的有关要求，建立了不确定度评定的数学模型，分析不确定度的主要来源，并将各分量进行合成。当铝含量为39.56mg/kg时，扩展不确定度为2.51mg/kg(k=2)。针对引起测定不确定度的主要贡献者，通过几种改变测量方法的途径，使其中3 个主要分量分别从0. 019 662、0. 002 412、0.002 74下降为0. 010 085、 0. 001 520、0. 001 66，效果显著，达到了降低影响结果准确性因素的目的。